Brite Max Enhanced Conspicuity Safety Products

C ustom P roducts C orporation · 1-800-367-1492 phone · 1-800-206-3444 fax · www.cpcsigns.com ©2020 Custom Products Corporation All Rights Reserved. BRITEMAX ENHANCED CONSPICUITY FOR SIGNS - MUTCD COMPLIANT 13 The Brite-Max A-Style Delineator can be mounted to a concrete barrier or guardrail post. Brite-Max A-Style Barrier Delineators Color Definitions WHITE: Lane markings or to mark the right pavement edge. YELLOW: Separate traffic moving in opposite directions, or mark the left pavement edge on one-way roadways. RED: Used to warn motorists of "Do Not Enter" or "Wrong Way". Also, delineators shall be red when used on a truck escape ramp. BLUE: Used to mark the location of fire hydrants on the shoulder or at the curb. GREEN: Used for snowplow markings. ORANGE: Used in construction work zone areas. About Delineators Delineators are beneficial at locations such as at lane-reduction transitions and curves and provide effective guidance at night and during adverse weather conditions. Refer to the MUTCD for more information. Retroreflective elements for delineators shall have a minimum dimension of 3 inches. Delineators are considered guidance devices rather than warning devices. Delineators may be used on long continuous sections of highway or through short stretches where there are changes in horizontal alignment. MUTCD Guidance PRODUCT ID: BMGA025(X)(XX)(S/D) Reflective Sheeting (X): (H) High Intensity Prismatic | (3) DG3 Diamond Grade Cube Reflective Colors (XX): (WH) White | (YE) Yellow | (FYE) Fluorescent Yellow Reflective Sides (S/D): (S) Single-Sided | (D) Double-Sided Reflectivity: 4" x 2.75" sheeting provides 11" square inches of reflectivity Body Size: 6.5" long x 4" wide x 2.5" tall in the bent position. Body Substrate: .080" Aluminum provides long life in all climates in both work zone and permanent installations. Compatibility: The Brite-Max A-Style BMGA025 Delineator is compatible with concrete barriers or guardrail post. Barrier mounting can be on top and/or on the side. MUTCD Guidance: Meets the minimum MUTCD requirements for reflectivity. Installation: Brite-Max A-Style Delineators have 4" x 3/4" mounting surfaces with (2) 1/4" diameter holes for fasteners and (4) 3/16" x 3/4" obround holes to assist with adhesion. NOTE: Adhesive and hardware, sold separately. Utilize Brite-Max Delineators for many other purposes such as utilities, incident management, parks and recreation areas. Standard reflective sheeting colors available by custom order. Call customer service at 1-800-367-1492 for details.