Brite Max Enhanced Conspicuity Safety Products

C ustom P roducts C orporation · 1-800-367-1492 phone · 1-800-206-3444 fax · www.cpcsigns.com ©2020 Custom Products Corporation All Rights Reserved. BRITEMAX ENHANCED CONSPICUITY FOR SIGNS - MUTCD COMPLIANT 4 (H/D/3)(WH) (H/D/3)(YE) (H/D/3)(RE) (D/3)(FY) (D)(OR) (H)(OR) (H)(GR) PRODUCT ID: BA080(X)(XX)(XXXX)D Materials: Reflective Sheeting mounted on .080” Aluminum Reflective Sheeting (X): (H) High Intensity Prismatic (D) VIP Diamond Grade | (3) DG3 Diamond Grade Cube Provides 16" square inches of reflectivity. 4" x 4" Square Brite-Max Delineators Provides 25" square inches of reflectivity. Hole Punch: 2 mounting holes top/bottom on center. (H)BU Hole Punch: 1 mounting hole on center. Provides 32" square inches of reflectivity. Hole Punch: 2 mounting holes top/bottom on center. PRODUCT ID: BA080(X)(XX)0404D PRODUCT ID: BA080(X)(XX)0505D (H/D/3)(WH) (H/D/3)(YE) (H/D/3)(RE) (D/3)(FY) (D)(OR) (H)(OR) (H)(GR) (H)BU PRODUCT ID: BA080(X)(XX)0408D (H/D/3)(WH) (H/D/3)(YE) (H/D/3)(RE) (D/3)(FY) (D)(OR) (H)(OR) (H)(GR) (H)BU Colors (XX): (YE) Yellow, (FY) Fluorescent Yellow, (WH) White, (RE) Red, (GR) Green, (OR) Orange/Fluorescent Orange, (BU) Blue Sizes (XXXX): (0404) 4" x 4" Square | (0505) 5" x 5" Diamond (0408) 4" x 8" Rectangle Compatibility: Fasten to U-Channel, Square, or Wood posts with mounting hardware, sold separately. NOTE: Standard available sizes, colors and sheeting combinations shown, custom combinations available. 5" x 5" Diamond Brite-Max Delineators 4" x 8" Rectangle Brite-Max Delineators Brite-Max Center Mount Delineators Color Definitions WHITE: Lane markings or to mark the right pavement edge. YELLOW: Separate traffic moving in opposite directions, or mark the left pavement edge on one-way roadways. RED: Used to warn motorists of "Do Not Enter" or "Wrong Way". Also, delineators shall be red when used on a truck escape ramp. BLUE: Used to mark the location of fire hydrants on the shoulder or at the curb. GREEN: Used for snowplow markings. ORANGE: Used in construction work zone areas. About Delineators Delineators are beneficial at locations such as at lane-reduction transitions and curves and provide effective guidance at night and during adverse weather conditions. Refer to the MUTCD for more information. Retroreflective elements for delineators shall have a minimum dimension of 3 inches. Delineators are considered guidance devices rather than warning devices. Delineators may be used on long continuous sections of highway or through short stretches where there are changes in horizontal alignment. MUTCD Guidance